MEMBER

  • 연구실 위치
  • 301동 1357호
    02-880-1901 (내선 1901)
  • 302동 213-1호
    02-880-1608 (내선 1608)

Professor

HOMEMEMBERProfessor
신상준교수
profile
성명:
신상준 (申尙埈)
소속:
기계항공공학부
직위:
교수, 학생부학장
오피스:
서울시 관악구 관악로 1 서울대학교 공과대학 301동 1418호
전화번호:
02-880-1642
팩스: 02-887-2662
E-mail:
ssjoon@snu.ac.kr

학력

1989 서울대학교 항공우주공학 학사
1991 서울대학교 항공우주공학 석사
Thesis title: Aeroelastic Stability of Helicopter Rotor Blades in Hover.
1999 미국 M.I.T. 항공우주공학 석사
Thesis title: Design, Manufacturing, and Testing of an Active Twist Rotor.
2001 미국 M.I.T. 항공우주공학 박사
Thesis title: Integral Twist Actuation of Helicopter Rotor Blades for Vibration Reduction.
(지도교수) Carlos E.S. Cesnik

경력

1991 - 1996 국방과학연구소 회전익기 체계실 연구원
2001 - 2003 미국 미시간대학교 항공우주공학과 박사후과정 연구원
2003.09 - 2008.03 서울대학교 기계항공공학부 조교수
2008.03 - 2013.06 서울대학교 기계항공공학부 부교수
2013.06 - 현재 서울대학교 기계항공공학부 교수

주요연구업적

  • 로터시스템의 동역학 및 공력탄성학 연구
  • 고정익기/회전익기/우주발사체 유체-구조 결합 해석 연구
  • 초소형 날갯짓 구조물에 대한 구조동역학 연구
  • 대형 구조물에 대한 대용량 전산구조해석

수상

  • 서울대학교 동창회 장학금 (1986-1987)
  • 서울대학교 Cum Laude 졸업  (1989)
  • Best Paper Award, Dynamics Session, 57th Annual Forum, American Helicopter Society (2001)
  • 국제무인항공기 논문 공모 산업통산자원부장관상, 한국항공우주산업진흥협회 (2013)
  • 제11회 KAI 항공우주 논문상 항공기술 부문 대상 (2013)
  • 제11회 KAI 항공우주 논문상 지도교수 특별상 (2013)
  • 한국항공우주학회 활동상 (2013)
  • 국토교통부 항공특성화대학 지원사업 제2회 학술발표대회 장려상, 한국항공진흥협회 (2013)(2013)
  • 한국항공우주학회 2013 추계학술발표회 우수논문발표상, 한국항공우주학회 (2013)
  • 한국전산구조공학회 2016 정기학술대회 송하원상, 한국전산구조공학회 (2016)
  • 한국전산구조공학회 2017 정기학술대회 논문상, 한국전산구조공학회 (2017)

학술지편집위원

  • 부 편집자: Functional Composites and Structures (2019년-현재)
  • 부 편집자: AIAA Journal (2019년-현재)
  • 부 편집자: International Journal of Aeronautical and Space Sciences (2010년-현재)
  • 부 편집자: 한국항공우주학회지 (2006년-2010년)
  • 부 편집자: 한국산업응용수학회 (2012년-현재)
  • 부 편집자: 한국전산구조공학회지 (2011년-2013년)

학술단체활동

  • 국제협력위원회 위원장: 1st International Forum on Rotorcraft Multidisciplinary Technology (Seoul, Korea, 2007년 10월)
  • 국제협력위원: 2nd International Forum on Rotorcraft Multidisciplinary Technology (Seoul, Korea, 2009년 10월)
  • 사무위원장: 한국전산구조공학회 Korea-Japan AnnualWorkshop (Busan, Korea, 2011년 4월)
  • 사무위원: 1st Asian Rotorcraft Forum and Exhibition (Busan, Korea, 2012년 2월)
  • 이사: 한국전산구조공학회 (2010년-현재)
  • 재무이사: 한국산업응용수학회 (2011년-현재)
  • 이사: 한국풍력에너지학회 (2013년-현재)
  • 평의원: 항공우주학회 (2013년-현재)
  • 기술위원회원: American Helicopter Society, 동역학 분과 (2013년-현재)
  • 기술위원회원: American Institute of Aeronautics and Astronautics, 구조동역학 분과(2016-현재)
  • 부석학회원: American Institute of Aeronautics and Astronautics(2018-현재)
  • 일반회원: 한국공학한림원 (2019-현재)

Journal Papers

    1. Joo, H. S., Cho, H. S., Chun, T. Y., Shin, S.-J., and Kwak, J. Y., "Parallel Computational Approach for Domain Decomposition Method based on Mixed-type Lagrange Multipliers," Journal of Computational Science, Accepted, 2019.
    2. Gong, D. H., Lee, D. W., Shin, S.-J., and Kim, S. Y., "String-based Flapping Mechanism and Modularized Trailing Edge Control System for Insect-type FWMAV," International Journal of Micro Air Vehicles, Accepted, 2019.
    3. Cho, H. S., Shin, S.-J., Lee, N. H., and Lee, S. S., "Computational Study of Fluid-Structure Interaction on Flapping Wing under Passive Pitching Motion," ASCE's Journal of Aerospace Engineering, Vol. 32, No. 4, pp. 1-15, Jul, 2019.
    4. Cho, H. S., Lee, N. H., Shin, S.-J., and Lee, S. S., "Extensive Three-dimensional Analysis for Fluid-Structure Interaction of Spanwise Flexible Plunging Wing," The Aeronautical Journal, Published Online, Mar, 2019.
    5. Lee, S. G., Lee, S. H., Shin, S.-J., Kim, Y., and Lee, S., "Pressure Mode Analysis of Non-uniform Cross-sectional Pipes and Preliminary Evaluation of a Pogo Suppressor," Proceedings of the Institution of Mechanical Engineers Part G: Journal of Aerospace Engineering, Published Online, Jan, 2019. [Online] Available: https://journals.sagepub.com/eprint/iqJfkznvvEXuzKyeBSmN/full
    6. Been, Y. B., Kang, Y. J., Kim, S. I., Shin, S. J., and Jang, S. Y., "Development of the Snapshot Method for Six Degree-of-Freedom Flight Dynamics Simulation of a High Aspect Ratio Wing Aircraft," International Journal of Aeronautical and Space Sciences, Vol. 19, No. 4, pp. 904-919, Dec, 2018.
    7. Ann, S., Cho, N., Kim, Y., Shin, S.-J., and Ahn, J., "Response Surface Modeling-Based Analysis on Launch Vehicle Capability," Advances in Space Research, Vol. 62, No. 12, pp. 3281-3297, Dec, 2018.
    8. Joo, H. S., Cho, H., Lee, Y. H., Shin, S.-J., Yoh, J. J., and Shin, J.-C., "Parametric study of a VLS based on 2-D FSI analysis," Aerospace Science and Technology, Vol. 84, pp.530-542, Nov, 2018.
    9. Kim, S. I., Cho, H., Joo, H. S., Shin, S.-J., and Kwak, J. Y., "Equivalent Structural Modeling Using Laminated Composite Shell Analysis for the Nozzle Component of a Launch Vehicle Engine," Journal of Aerospace Engineering, Vol . 31, No. 6, Nov, 2018.
    10. Visconti, U., Eun, W. J., Sim, J. S., Lee, S. W., and Shin, S.-J., "Design Improvements and Flap Deflection Evaluations with Considering Centrifugal Load on Active Trailing Edge Flap," Aircraft Engineering and Aerospace Technology, Vol. 91, No. 1, pp.10-19, Nov, 2018.
    11. Lee, N., Lee, S., Cho, H., and Shin, S.-J., "Effect of fexibility on flapping wing characteristics in hover and forward flight," Computers and Fluids, Vol. 173, pp. 111-117, Sep, 2018.
    12. Park, C. W., Im, B. U., Shin, S.-J., Yoon, B. S., Park, J. W., and Yoon, K. J., "Numerical and Experimental Analysis of a Smart Fin using Single Crystal Piezoelectric Actuator," Journal of Aircraft, Vol. 55, No. 5, pp. 1817-1830, Sep, 2018.
    13. Kim, Y., Cho, H., Park, S., Kim, H., and Shin, S.-J., "Advanced Structural Analysis based on Reduced Order Modeling for Gas Turbine Blade," AIAA Journal, Vol. 56, No. 8, pp. 3369-3373, Aug, 2018.
    14. Lee, Y. H., Gwak, M. C., Cho, H., Joo, H. S. Shin, S.-J., Yoh, J. J., and Shin, J. C., "Numerical simulation of severely transient fluid-structure interaction problem associated with a vertical launching system," Journal of Spacecraft and Rockets, Vol. 55, No.4, pp. 948-958, Jun, 2018.
    15. Kee, Y. J., Kim, D. K., and Shin, S.-J., "Geometrically Nonlinear Free Vibration Analysis of Composite Rotor Blades with Advanced Tip Shapes," Journal of the American Helicopter Society, [Accepted for publication], pp.1-41, Feb, 2018.
    16. Joo, H. S., Cho, H. S., Kim, S. I., Shin, S.-J., and Kwak, J. Y., "Parallel computation for three-dimensional shell analysis of curved con figuration based on domain decomposition method," Journal of Computational Science, Vol. 24, pp.24-33, Jan, 2018.
    17. Cho, H. S., Kim, H. D., and Shin, S.-J., "Geometrically nonlinear dynamic formulation for three-dimensional co-rotational solid elements," Computer Methods in Applied Mechanics and Engineering, Vol. 328, pp.301-320, Jan, 2018.
    18. Eun, W. J., Sim, J. S., Lee, S. W., and Shin, S.-J., "Further Improvements in the SNUF Blade Design by Numerical Design Optimization Framework," ASCE's Journal of Aerospace Engineering, Vol. 31, No. 1, pp.1-15, Jan, 2018.
    19. Lee, S. G., Sim, J. S., Shin, S.-J., and Kim, Y. D., "Longitudinal Modal Analysis of LOX- filled Tank using the Virtual Mass Method," International Journal of Aeronautical and Space Sciences, Vol. 18, No. 4, pp.112-120, Dec, 2017.
    20. Lim, J. H., Shin, S.-J., and Kee, Y. J., "Further Improvement in Rotor Aerodynamics Estimation in Helicopter Conceptual Design and Optimization Framework for a Compound Rotorcraft," International Journal of Aeronautical and Space Sciences, Vol. 18, No. 4, pp.112-121, Dec, 2017.
    21. Sim, J. S., Lee, S. G., Kim, J. B., Shin, S.-J., Park, S. S., and Ohm, W. S., "Structural Dynamic Analysis of a Space Launch Vehicle using and Axisymmetric Two-dimensionalShell Element," International Journal of Aeronautical and Space Sciences, Vol. 18, No.3, pp.485-497, Sep, 2017.
    22. Kim, J. B., Sim, J. S., Lee, S. G., Shin, S.-J., Park, J. H., and Kim, Y., "Integrated one-dimensional dynamic analysis methodology for space launce vehicles reecting liquid components," The Aeronautical Journal, Vol. 121, No. 1243, pp.1217-1238, Sep, 2017.
    23. Cho, H. S., Joo, H. S., Shin, S.-J., and Kim, H. D., "Elastoplastic and contact analysis based on consistent dynamic formulation of co-rotational planar elements," International Journal of Solids and Structures, Vol. 121, pp.103-116, Aug, 2017.
    24. Oh, G. T., Park, J. H., Park, J. H., Lee, H. J., Kim, Y. D., Shin, S.-J., Ahn, J. M., and Cho, S. B., "Load relief control of launch vehicle using aerodynamic angle estimation," Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, [Accepted for publication], pp.1-8, Mar, 2017.
    25. Cho, H. S., Shin, S.-J., and Yoh, J. J., "Geometrically nonlinear quadratic solid/solid-shell element based on consistent corotational approach for structural analysis under prescribed motion," International Journal for Numerical Methods in Engineering, Vol. 112, No. 5, pp.434-458, Mar, 2017.
    26. Cho, H. S., Kwak, J. Y., Joo, H. S., and Shin, S.-J., "Development of Nonlinear Structural Analysis Using Co-rotational Finite Elements with Improved Domain Decomposition Method," Part of the Lecture Notes in Computational Science and Engineering book series, Vol. 116, Ch. 4, pp.31-42, Mar, 2017.
    27. Eun, W. J., Kim, J. W., Chung, C. H., Shin, S.-J., Kwon, O. J., and Bauchau, O. A., ”Coupled Analysis of Thermo-Fluid-Flexible Multi-body Dynamics of a TwoDimensional Engine Nozzle,” International Journal of Aeronautical and Space Sciences, Vol. 18, No. 1, pp.112-123, Mar, 2017.
    28. Jeon, J. H., Cho, H. S., Kim, Y. H., Lee, J. H., Gong, D. H., Shin, S.-J., and Kim, C.
    A., ”Design and analysis of the link mechanism for the flapping wing MAV using flexible multi-body dynamic analysis,” International Journal of Micro Air Vehicles, Vol. 9, No. 4, pp.253-269, Feb, 2017.
    29. Cho, H. S., Lee, N. H., Kwak, J. Y., Shin, S.-J., and Lee, S. S., ”Three-dimensional fluid-structure interaction analysis of a flexible flapping wing under the simultaneous pitching and plunging motion,” Nonlinear Dynamics, Vol. 86, No. 3, pp.1951-1966, Nov, 2016.
    30. Gwak, M. C., Lee, Y. H., Kim, K. H., Cho, H. S., Shin, S.-J., and Yoh, J. J., ”All Eulerian method of computing elastic response of explosively pressurised metal tube,” Combustion Theory and Modelling, Vol. 21, No. 2, pp.293-308, Sep, 2016.
    31. Cho, H. S., Kwak, J. Y., Shin, S.-J., Lee, N. H., and Lee, S. S., ”Flapping-Wing Fluid-Structure Interaction Analysis using Co-rotational Triangular Planar Structural Elements,” AIAA Journal, Vol. 54, No. 8, pp.2265-2276, Aug, 2016.
    32. Kim, J. H., Park, S. R., Eun, W. J., Shin, S.-J., and Lee, S. G., ”Vibratory loads and response prediction for a high-speed flight vehicle during launch events,” International Journal of Aeronautical and Space Sciences, Vol. 17, No. 4, pp. 112-121, Dec, 2016.
    33. Park, K. J., Kang, H. J., Choi, I. H., Shin, S.-J., and Kim, S. J., ”Progressive Failure Analysis of CFRP Laminates Using Combined Material nonlinear Elasticity and Continuum Damage Mechanics Based on Treatment Coupon Test,” The Journal of Composite Materials, Vol. 50, No. 11, pp.1431-1455, Jun, 2016.
    34. Lim, J. H., Shin, S.-J., and Kee, Y. J., “Optimization of a Rotor Structural Design in Compound Rotorcraft with a Lift Offset,” Journal of the American Helicopter Society, Vol. 61, No. 1, pp.1-14, Jan, 2016.
    35. Nam, K. M., Park, K. J., Shin, S.-J., Kim, S. J., and Choi, I. H, ”Estimation of Composite Laminate Design Allowable s Using the Statistical Characteristics of Lamina Level Test Data,”The International Journal of Aeronautical and Space Sciences, Vol.
    16, No. 3, pp. 360-369, Sep. 2015.
    36. Kwak, J. Y., Cho, H. S., Chun, T. Y., Shin, S.-J., and Bauchau, O. A., ”Domain Decomposition Approach Applied for Two- and Three-dimensional Problems via Direct Solution Methodology,”The International Journal of Aeronautical and Space Sciences, Vol 16. No. 2, pp.177-189, Jun, 2015.
    37. Eun, W. J., Ryu, H. Y., Shin, S.-J., Kee, Y. J., and Kim, D. G., ”Predictions on the Internal Loads and Structural Deflection in a Fullscale Experimental Bearingless Rotor.” The International Journal of Aeronautical and Space Sciences, Vol 16, No. 1, Mar, 2015.
    38. Kee, Y. J., and Shin, S.-J., “Structural Dynamic Modeling for Rotating Blades Using Three Dimensional Finite Elements,” Journal of Mechanical Science and Technology, Vol. 29, No. 4, pp.1607-1618, Feb, 2015.
    39. Ryu, H. Y., and Shin, S.-J., “Prediction of the Aeromechanics for HART II rotor in Descending Flight using Mixed Variational Geometrically Exact Beam Analysis,” Journal of Mechanical Science and Technology, Vol. 29, No. 1, pp.141-150, Jan, 2015.
    40. Cho, H. S., Ryu, H. Y., Shin, S.-J., Cho, I. J., and Jang J. S., “Development of a Coupled Analysis Regarding the Rotor/Dynamic Compo-nents of a Rotorcraft,” Journal of Mechanical Science and Technology, Vol. 28, No. 12, pp.4841-4856, Dec, 2014.
    41. Lim, J., Shin, S.J., Laxman, V., Kim, J., and Jang, J., “Development of an Improved Framework for the Conceptual Design of a Rotorcraft,” Aircraft Engineering and Aerospace Technology, Vol. 86, No. 5, pp.375-384, Oct, 2014.
    42. Lim, J. H., Choi, S., Shin, S.-J., and Lee D.-H., “Wing Design Optimization of a SolarHALE Aircraft,” The International Journal of Aeronautical and Space Sciences, Vol. 15, No. 3, pp.219-231, Sep, 2014.
    43. Na, Y.-H., Kim, J. H., and Shin, S.-J., “Vibration Analyses of an Equivalent Plate Wing with an External Store,” The Aeronautical Journal, Vol. 118. No.1207. pp.1-9, Sep, 2014.
    44. Kwak, J. Y., Chun, T. Y., Shin, S.-J. and Bauchau, O. A., “Domain Decomposition Approach to Flexible Multibody Dynamics Simulation,” Computational Mechanics, Vol.
    53, No. 1, pp. 147-158, Jan, 2014.
    45. Lee, J. H., Natarajan, B., Eun, W. J., Viswamurthy S. R., Park, J. S., Kim, T. S. and Shin, S.-J., “Structural and Mechanism Design of an Active Trailing-edge Flap Blade”, Journal of Mechanical Science and Technology, Vol. 29, No. 9, pp. 2605-2617, Sep, 2013.
    46. Na, Y.-H., and Shin, S.-J., “Equivalent-Plate Analysis for a Composite Wing with a Control Surface”, Journal of Aircraft, Vol. 50, No. 3, pp. 853-862, May, 2013.
    47. Chun, T. Y., Ryu, H. Y., Cho, H. S., Shin, S.-J., Kee, Y. J. and Kim, D. K., “Structural Analysis of a Bearingless Rotor using an Improved Flexible Multi-body Model,” Journal of Aircraft, Vol. 50, No. 2, pp.539-550, Mar, 2013.
    48. Kim, T. S., Lim. J., Shin, S.-J., and Kim, D.-H., “Structrual Design Optimization of a Tiltrotor Aircraft Composite Wing to Enhance Whirl Flutter Stability,” Composite Structures, Vol. 95, pp. 283-294, Jan, 2013.
    49. Lee, I., Shin, S.-J., and Kim, Y. R., “Mistuned Bladed Disk Forced Vibration Analysis Based on Standing Wave Formulation,” Aerospace Science and Technology, Vol. 24, No. 1, pp. 275-282, Jan, 2013.
    50. Lee, I., Shin, S.-J., and Kim, T. H., “Forced Vibration of Cascade Predicted by Transformation Techniques Considering Flow Compressibility,” AIAA Journal, Vol.51, No.1, pp. 262-265, Jan, 2013.
    51. Yoon, N. K., Chung, C. H., Na, Y.-H., and Shin, S.-J., “Control Reversal and Torsional Divergence Analysis for a High-Aspect-Ratio Wing,” Journal of Mechanical Science and Technology, Vol. 26, No. 12, pp. 385-393, Jan, 2013.
    52. El Arras, A., Chung, C. H., Na, Y.-H.,Shin, S.-J., Jang, S. Y., Kim, S. Y. and Cho, C. M., “Various Structural Approaches to Analyze an Aircraft with High Aspect Ratio Wings ,”International Journal of Aeronautical and Space Sicences, Vol. 13, No. 4, pp. 446-457, Dec, 2012.
    53. Natarajan B., Lee, J. H., Lim, J. H., and Shin, S.-J., “Structural analysis of Composite Wind Turbine Blade using Advanced Beam Model Approach,” International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 12, pp. 2245-2250, Dec, 2012.
    54. Chung, C. H., and Shin, S.-J., “Validation of a Robust Flutter Prediction by Optimization,” International Journal of Aeronautical and Space Sciences, Vol. 13, No. 1, pp. 361-375, Mar, 2012.
    55. Lee, I., Shin, S.-J., and Kim, T., “Aeroelastic Analysis of Cascades using Transformation Techniques,” AIAA Journal, Vol. 50, No. 3, pp. 733 -736, Mar, 2012.
    56. Kim, T. S., Shin, S.-J., and Kim, D. H., “Influence of Geometric Coupling on the Whirl Flutter Stability in Tiltrotor Aircraft with Unsteady Aerodynamics,” ASCE Journal of Aerospace Engineering, Vol. 25, No. 1, Jan, 2012.
    57. Lee, J. B., Yee, K. J., Yoo, S. J., Lee, I., Shin, S.-J., and Kim, D. K., “Aeroelastic Analysis of a Hingeless Rotor Using a Dynamic Wake Model,” Journal of Aircraft, Vol. 48, No. 5, pp.1817-1822, Sep-Oct, 2011.
    58. Laxman, V., Lim, J. H., Shin, S.-J., Ko, K, H., and Jung, S. N., “Power and Trim Estimation for Helicopter Sizing and Performance Analysis,” International Journal of Aeronautical and Space Sciences, Vol. 12, No. 2, pp.152-166, Jun, 2011.
    59. Lee, H. K., Viswamurthy, S. R., Park, S. C., Kim, T. S., Shin, S.-J., and Kim, D. K., “Helicopter Rotor Load Prediction Using a Geometrically Exact Beam with Multicomponent Model” Journal of Aircraft, Vol. 47, No. 4, pp.1382-1390, Jul-Aug, 2010.
    60. Kim, T. S., Shin, S.-J., and Kim, T., “Analysis of Tiltrotor Whirl Flutter in Time and Frequency Domain,” Journal of Mechanical Science and Technology, Vol. 23, No. 12, pp.3281-3291, Sep, 2009.
    61. Chung, C. H., Shin, S.-J., and Kim, T., “Development of an Aircraft Worst Case Flutter Prediction with Mach Variation using Robust Stability Analysis,” Journal of Mechanical Science and Technology, Vol. 23, No. 8, pp.2059-2071, Aug, 2009.
    62. Shin, S.-J., Cesnik, C. E. S., Wilkie, W. K., and Wilbur, M. L., “Design and Manufacturing of a Model-scale Active Twist Rotor Prototype Blade,” Journal of Intelligent Material Systems and Structures, Vol. 19, No. 11, pp.1443-1456, Dec, 2008.
    63. Park, J. S., Shin, S.-J., and Kim, D. K., “Design and Vibratory Loads Reduction Analysis of Advanced Active Twist Rotor Blades Incorporating Single Crystal Piezoelectric Fiber Composites,” The Korean Society for Aeronautical and Space Sciences (KSAS) International Journal, Vol. 9, No. 2, pp.18-33, Nov, 2008.
    64. Kim, T. S. and Shin, S.-J., “An Advanced Analysis on Tiltrotor Aircraft Flutter Stability Including Unsteady Aerodynamics,” AIAA Journal, Vol. 46, No. 4, pp.1002-1012, Apr, 2008.
    65. Cho, S. H., Kim, T. H., Song, S. J., and Shin, S.-J., “Aeroelastic Analysis of an Isolated Airfoil Under a Pulsating Flow,” AIAA Journal, Vol. 45, No. 5, pp. 1000-1006, May, 2007.
    66. Shin, S.-J. and Cesnik, C. E. S., “Helicopter Vibration Reduction in Forward Fight using Blade Integral Twist Actuation,” Journal of Mechanical Science and Technology, Vol. 21, No. 2, pp.24-34, Feb, 2007.
    67. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., “Design and Simulation of Integral Twist Control for Helicopter Vibration Reduction,” International Journal of Control, Automation, and Systems, Vol. 5, No. 1, pp.251-263, Feb, 2007.
    68. Paik, S. H., Yoon, T. H., Shin, S.-J., and Kim, S. J., “Computational Material Characterization of Active Fiber Composite,” Journal of Intelligent Material Systems and Structures, Vol. 18, No. 1, pp.19-28, Jan, 2007.
    69. Kim, K. H., Shin, S-J, Lee, J., Yee, K., and Oh, S., “Toward a More Complete Analysis for Fluid-Structure Interaction in Helicopters,” KSAS International Journal, Vol. 7, No. 2, Nov, 2006.
    70. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., “System Identification Technique for Active Helicopter Rotors,” Journal of Intelligent Material Systems and Structures, Vol. 16, No. 11-12, pp.1025-1038, Nov, 2005.
    71. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., “Closed-loop Control Test of NASA/Army/ MIT Active Twist Rotor for Vibration Reduction,” Journal of the American Helicopter Society, Vol. 50, No. 2, pp.178-194, Apr, 2005.
    72. Wilbur, M. L., Mirick, P. H., Yeager, Jr., W. T., Langston, C. W., Cesnik, C. E. S., and Shin, S.-J., “Vibratory Loads Reduction Testing of the NASA/Army/MIT Active Twist Rotor,” Journal of the American Helicopter Society, Vol. 47, No. 2, pp.123-133, Apr, 2002.
    73. Cesnik, C. E. S. and Shin, S.-J., “On the Modeling of Integrally Actuated Helicopter Blades,” International Journal of Solids and Structures, Vol. 38, No. 10-13, pp.1765-1789, Mar, 2001.
    74. Cesnik, C. E. S., Shin, S.-J., and Wilbur, M. L., “Dynamic Response of Active Twist Rotor Blades,” Smart Materials and Structures-Special Issue on Rotorcraft Applications, Vol. 10, pp.62-76, Feb, 2001.
    75. Cesnik, C. E. S. and Shin, S.-J., “On the Twist Performance of a Multiple-Cell Active Helicopter Blade,” Smart Materials and Structures-Special Issue on Rotorcraft Applications, Vol. 10, pp.53-61, Feb, 2001.

        Conference Papers

        1. Park, S. H., Eun, W. J., and Shin, S.-J., ”Hybrid Analysis for Quadrotor type UAV and Modified Blade Element Momentum Theory considering Gust and Flight Condition,”AIAA Scitech 2019 Forum, San Diego, California, Jun 7-11, 2019.
        2. Lee, S. H., Cho, H. S., Kim, H. D., and Shin, S.-J., ”Expedited Aeroelastic Analysis Using Proper Orthogonal Decomposition and Reduced Order Modelling,”AIAA Scitech 2019 Forum, San Diego, California, Jun 7-11, 2019.
        3. Gong, D. H., Cho, H. S., and Shin, S.-J., ”Parametric Study on the Flapping Wing Vein Configuration using Nonlinear Beam/Shell Assemblage,”The 14th Intelligent Conference on Intelligent Unmmaned Systems, Jeju, Korea, Aug 20-23, 2018.
        4. Shin, S.-J., Joo, H. S., Kang, S. H., Jang, I., Park, T.-Y., and Ohm, W. S., ”Numerical analysis on jet noise for a small-scale rocket and its validation,”The 1st KSCM-GACM Joint Workshop, Seoul, Korea, Oct 24-25, 2018.
        5. Joo, H. S., Cho, H. S., Cheon, T.-Y., and Shin, S.-J., ”Fast Parallel Computation for Structural Analysis based on FETI-type Approaches,”2018 Asia-Pacific International Symposium on Aerospace Technology, Cheongdu, China, Oct 16-18, 2018.
        6. Cho, H. S., Im, B. W., and Shin, S.-J., ”Improved Geometrical Exact Beam Formulation for Moving Composite Structures,”2018 Asia-Pacific International Symposium on Aerospace Technology, Cheongdu, China, Oct 16-18, 2018.
        7. Joo, H. S., Cho, H. S., and Shin, S.-J., ”Large-size Structural Computing by Local and Mixed Type Finite Elements,”6th European Conference on Computational Mechanics, Glasgow, UK, Jun 11-15, 2018.
        8. Cho, H. S., Kim, H. D., and Shin, S.-J., ”POD-ROM for Nonlinear Structural Analysis Based on Co-rotational Finite Element and Parallelized Domain Decomposition,”13th World Congress on Computational Mechanics, New York City, New York, US, Jul 22-27, 2018.
        9. Gong, D. H., Cho, H. S., Joo, H. S., and Shin, S.-J., ”Three-dimensional Nonlinear Analysis by Web-based Co-rotational Shell Analysis,”4th International Conference on Computational Design in Engineering, Changwon Exhibition Convention Center, Korea, Apr 1-5, 2018.
        10. Joo, H. S., Jang, I. M., Kang, S. H., Shin, S.-J., and Ohm, W. S., ”Numerical Prediction on Jet Aeroacoustics for an Experimental Scale Rocket Nozzle,”4th International Conference on Computational Design in Engineering, Changwon Exhibition Convention Center, Korea, Apr 1-5, 2018.
        11. Gong, D. H., Lee, D. W., Shin, S.-J., and Kim, S. Y., ”Design and Experiment of String-based Flapping Mechanism and Modulized Trailing Edge Control System for Insect-like FWMAV,”2018 AIAA INFORMATION SYSTEMS-AIAA INFOTECH @ AEROSPACE, Kissimmee, Florida, USA, Jun 8-12, 2018.
        12. Eun, W. J., Im, B. W., and Shin, S.-J. ”Endurance Test of the SNUF Blade with Active Trailing-Edge Flap,”The 6th Asian/Australian Rotorcraft Forum and HeliJapan, Kanazawa, Japan, Nov 7-9, 2017
          13. Lee, S. H., Lee, Y. H., Choi, I. R., and Shin, S.-J., ”Development of an Aeroelastic Analysis for an Aircraft with Low Aspect Ratio Wings,”2017 Asia-Pacific International Symposium on Aerospace Technology, Seoul, Korea, Oct 16-18, 2017.14. Lee, D. W., Eun, W. J., and Shin, S.-J., ”Conceptual Design Framework based on the Genetic Algorithm for a Fan-in-wing High-Speed Rotorcraft,”2017 Asia-Pacific International Symposium on Aerospace Technology, Seoul, Korea, Oct 16-18, 2017.
          15. Lee, D. W., Gong, D. H., and Shin, S.-J., ”Design of Wing Incidence Control Mechanism for Insect-mimicking Tailless FW-MAV,”International Conference of Intelligent Unmanned System 2017, Tamkang University,Tamsui, Taiwan, Aug 21-24, 2017.
          16. Joo, H. S., Cho, H. S., Lee, Y. H., Kwak, M. C., Shin, S.-J., and Yoh, J. J., ”Parametric study of the vertical launcher by coupled CFD/CSD with hybrid particle level-set method,”Coupled Problem 2017, Rhodes Island, Greece, Jun 12-14, 2017.
          17. Cho, H. S., Lee, N. H., Shin, S.-J., and Lee, S. S., ”Implicit Fluid-structure Interaction Analysis using Realistic Structural Modeling for Insect-like Flapping Wing,”Coupled Problem 2017, Rhodes Island, Greece, Jun 12-14, 2017.
          18. Eun, W. J., Sim, J. S., Lee, S. W., and Shin, S.-J., ”Advancement of the SNUF Blade Design through Flap Configuration Parametric Study and Optimization Framework,”73rd American Helicopter Society International Annual Forum, Fort Worth, Texas, USA, May 8-11, 2017.
          19. Joo, H. S., Cho, H. S., Shin, S.-J., Lee, Y. H., Gwak, M. C., and Yoh, J. J., ”Computational approach for vertical launcher by coupled CFD/CSD with hybrid particle level-set method,”58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Grapevine, Texas, USA, Jan 9-13, 2017.
          20. Kim, S. I., Cho, H. S., Joo, H. S., and Shin, S.-J., ”Development of Three-dimensional Structural Analysis for Engine Nozzle Using Anisotropic Facet Shell Element,”58th
          AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
          Grapevine, Texas, USA, Jan 9-13, 2017.
          21. Cho, H. S., Lee, N. H., Shin, S.-J., Lee, S. S., and Kim, S. Y., ”Improved Computational Approach for 3-D Realistic Insect-like Flapping Wing using Co-rotational Finite Elements,”55th AIAA Aerospaces Sciences Meeting, Grapevine, Texas, USA, Jan 9-13, 2017.
          22. Sim, J. S., Kim, J. B., Lee, S. G., Shin, S.-J., Choi, H. S., and Yoon, W. S., ”Further Extended Structural Modeling and Modal Analysis of Liquid Propellant Launch Vehicles for Pogo Analysis,”AIAA SPACE Forum 2016, Long Beach, California, USA, Sep 13-16, 2016.
          23. Lee, N. H., Kim, M. S., Lee, S. S., Cho, H. S., and Shin, S.-J., ”Computational Study of Three-Dimensional Rigid Flapping Wings with Unequal Pitch/Plunge Frequency,”34th AIAA Applied Aerodynamics Conference, Washington, D.C., USA, Jun 13-17, 2016.
          24. Visconti, U., Eun, W. J., Kang, J. P., Lim, J. H., Sim, J. S., and Shin, S.-J., ”Transient Flow Analysis and Static Bench Measurements for an Active Trailing-Edge Flap,”57th
          AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
          San Diego, California, USA, Jan 4-8, 2016.
          25. Jeon, J. H., Cho, H. S., Kim, Y. H., Lee, J. H., Shin, S.-J., and Kim, C. A., ”Design and Analysis of the Link Mechanism in the Flapping Wing MAV Using Flexible Multi-Body Dynamic Analysis,”57th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, San Diego, California, USA, Jan 4-8, 2016.
          26. Cho, H. S., Joo, H. S., Park, C. W., and Shin, S.-J., ”Nonlinear Flexible Multibody Approaches using Co-rotational Finite Elements,” 3rd international Conference on Computational Design in Engineering(CODE2015), Tokyo, Japan, December 14-15, 2015.
          27. Park, C. W., Chung, C. H., Kang, Y. J., Shin, S.-J., Yoon, B. S., Park, J. H., and Yoon, K. J., ”Parameter Study for Performance Improvement on Smart Fins Operated by Piezoelectric Actuators,” The 26th International Conference on Adaptive Structures and Technologies, Kobe, Japan, October 14-16, 2015.
          28. Joo, H. S., Park, C. W., Cho, H. S., and Shin, S.-J., ”Development of the twodimensional membrane element including incompatible modes for web-based implementation,” 2015 World Congress on Advances in Structural Engineering and Mechanics(ASEM15), Songdo, Korea, August 25-28, 2015.
          29. Kim J, H., Park, S, R., Eun, W. J., Shin, S.-J., and Lee, S. G., ”Vibration response prediction of a high-speed flight vehicle considering acoustic and rocket motor excitation,” Inter-Noise 2015, San Francisco, California, USA, August 9-12, 2015.
          30. Shin, S.-J., Cho, H. S., Joo, H. S., and Kwak, J. Y., ”Development of Nonlinear Structural Analysis using Co-rotational Finite Elements with improved Domain Decomposition on Methods,” 23rd International Conference on Domain Decomposition Methods, Jeju, Korea, July 6-10, 2015.
          31. Eun, W. J., Kim, J. W., Chung, C. H., Shin, S.-J., Kwon, O. J., and Bauchau, O. A., ”Coupled Analysis of Thermo-Fluid-Flexible Multi-body Dynamics for a TwoDimensional Engine Nozzle,” 2015 ECCOMAS Thematic Conference on Multibody Dynamics, Barcelona, Spain, June 29 - July 2, 2015.
          32. Kang, Y. J., Chung, C. H., Jeon, J. H., Shin, S.-J., and Na, Y. H., ”Nonlinear Aeroservoelastic Analysis for a Three-Dimensional Horizontal Stabilizer with an Actuator Composed of Elastic Links,” 16th International Forum on Aeroelasticity and Structural Dynamics, St. Petersburg, Russia, June 28 - July 2, 2015.
          33. Kee, Y. J., and Shin, S.-J., ”Structural Dynamic Modeling for Rotating Blades Using Three Dimensional Finite Elements,” 7 1st American Helicopter Society international Annual Forum, Virginia Beach, VA, USA, May 5-7, 2015.
          34. Lim, J. H., Shin, S.-J., Kang, Y. J., and Kee, Y. J., ”Development of Conceptual Design Framework with Rotor Structural Design Optimization for Compound Rotorcraft with Lift Offset,” 71st American Helicopter Society international Annual Forum, Virginia Beach, VA, USA, May 5-7, 2015.
          35. Roh, I. S., Shin, S.-J., Yoon, B. S. and Yoon, K. J., “Structural Analysis of a Smart Fins Embedded with Single Crystal Piezoelectric Actuators,” 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Florida , January 5-9, 2015.
          36. Kang, J. P., Eun, W. J., Lim, J. H., Visconti, U., and Shin, S.-J., “Design Improvements of Smart Active Trailing-edge Flap for Rotating Test,” 56th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Florida , January 5-9, 2015.
          37. Lee, N., Lee, S., Cho, H. S., Kwak, J. Y. and Shin, S.-J., “Computational Analysis for Flapping Wing by Coupled CFD and CSD Solutions,” 29th Congress of the International Council of the Aeronautical Sciences, St. Petersburg, Russia, September 7-12, 2014.
          38. Park, K. J., Kang, H., Shin, S. J., Choi, I., Kim, M. K. and Kim, S.-J., “Statistical Approach to Determine Continuum Damage Weibull Parameters in Laminate Composites,” 2014 Asia-Pacific International Symposium on Aerospace Technology, Shanhai, China, September 24-26, 2014.
          39. Ryu, H. Y., Shin, S.-J., Yu, D. O., and Kwon, O. J., “Prediction of the Rotor Aeromechanics in Descending Flight using Mixed Variational Geometrically Exact Beam Model and CFD Coupled Analysis,” 40th European Rotorcraft Forum, Southhampton, UK, September, 02-05, 2014.
          40. Kwak, J.-Y., Cho, H. S., Shin, S.-J., and Bauchau, O. A., “Development of a transient structural analysis algorithm by using FETI-local method,” 11th World Congress on Computational Mechanics, Barcelona, Spain, July, 20-25, 2014.
          41. Eun, W. J., Kim J. W., Kwak, J. -Y., Shin, S.-J., Kwon, O. J., and Bauchau, O.
          A., “Coupled Analysis between Fluid and Multibody Dynamics for a Two-Dimensional Engine Nozzle,” The 3rd Joint International Conference on Multibody System Dynamics, Busan, Korea, June 30 - July 3, 2014.
          42. Ryu, H. Y., Cho, H. S., Eun, W. J., Shin, S.-J., and Kee, Y. J., “Validation of Rotor Aerodynamics Predictions of HIngeless Rotor using a Flexible Multi-body Approach,” 5th AHS Aeromechanics Specialists’ Conference, San Francisco, USA, January, 22-24, 2014.
          43. Cho, H. S., Kwak, J.-Y., Shin, S.-J., Lee, N. and Lee, S., “A Computational Analysis for Flapping Wing by Couping the Geometrically Exact Beam and Preconditioned Navier-Stokes Solution,” 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Maryland, USA, January, 15-17, 2014.
          44. Eun, W. J., Ryu, H.-Y., Shin, S.-J., Kee, Y. J. and Kim, D.-K., “AerodynamicsStructural Coupled Analysis of a Bearingless Rotor using a Flexible Multi-body model,”
          55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Maryland, USA, January, 15-17, 2014.
          45. Lim, J., Shin, S., -J., Kee, Y., Kwon, H., and Jang, J., “Development of Design Optimization Framework for a Compound Rotorcraft with a Lift Offset,” The 2013 AsiaPacific International Symposium on Aerospace Technology, Takamatsu, Japan, November 20-21, 2013.
          46. Chung. C. H., Shin, S. J.,“Worst Case Flutter Boundary Prediction for both Clean and Stored-With with Flight Mach Number Variation,” 2013 Asia-Pacific International Symposium on Aerospace Technology, Takamatsu, Japan,November 20-22, 2013.
          47. Eun, W. J., Cho, H. S., Ryu, H.-Y. and Shin, S.-J., “Trim Analysis of a Bearingless Rotor based on Improved Flexible Multi-body Dynamics,”2nd Asian/Australian Rotorcraft Forum, Tianjin, China, September 08-11, 2013.
          48. Natarajan, B., Eun, W. J., Lee, J. H., and Shin, S.-J., “Helicopter Vibration Control using a Smart Trailing-edge Flap Rotor Blade,” The 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio(BAMN2013), August 26-30, 2013.
          49. Cho, H. S., Lee, N., Kwak, J. Y., Shin, S.-J. and Lee, S., “CFD-CSD Coupled Analysis for Flapping Wing by the Geometrically Exact Beam and Incompressible NavierStokes Solution,” The 7th World Congress on Biomimetics, Artificial Muscles and Nano-Bio(BAMN2013), August 26-30, 2013.
          50. Nitesh, K. K., Kang, H. J., Park, K. J., Nam, K. M., Chung, C. H., Choi, I. H., Kim, M.
          K., and Shin, S.-J., “Direct Numerical Simulation of Damage Progression in Laminated Composite Plates using Multi-Scale Modeling,” The 19th International Conference on Composite Materials, Montreal, Canada, July 28-August 2, 2013
          51. Na, Y.-H., Chung, C. H., Rho, I. S., and Shin, S. J., “Aeroelastic Analysis for A Three Dimensional Structurally Nonlinear Wing With A Control Surface,” International Forum On Aeroelasticity and Structural Dynamics, UK, June 24-26, 2013
          52. Ryu, H.-Y., Cho, H. S., Eun, W.-J., Shin, S.-J., Lee, J. B., and Yee, K.-J., “Helicopter Forward Flight Prediction using Geometrically Exact Beam Model and an Advanced Unsteady Aerodynamics,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, Massachusetts, USA, April 8-11, 2013.
          53. Kwak, J. Y., Cho, H. S., Shin, S.-J., and Bauchau, O. A., “Improved Finite Element Domain Decomposition Method using Local and Mixed Lagrange Multipliers,” 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Boston, Massachusetts, USA, April 8-11, 2013.
          54. Lee, I., Na, Y. H., Shin, S.-J., “Aeroelastic Analysis of a Turbine Blade using Transform Techniques and a Non-Uniform Beam Model,” IUAAAT-13, December 11-14, 2012
          55. Ryu, H.-Y., Cho, H. S., Eun, W.-J. and Shin, S.-J., “Aerodynamics-Structural Coupled Analysis for Helicopter Free Flight Prediction,” 2012 Asia-Pacific International Symposium on Aerospace Technology, November 13-14, 2012
          56. Cho, H. S., Ryu, H.-Y. and Shin, S.-J., “Development of an Aerodynamics-StructureFuselage Analysis Including Dynamic Components for Rotorcraft,” 2012 Asia-Pacific International Symposium on Aerospace Technology, November 13-14, 2012
          57. Kwak, J. Y., Cho, H. S., Shin, S.-J., and Bauchau, O. A., “Development of Transient Time Structural Analysis using Local and Global FETI Method,” 2nd International Conference on Computational Design in Engineering, November 14-16, 2012.
          58. Lim, J. H., Shin, S.-J., Kwon, H. J., and Jang, J. S., “Expansion of the Rotorcraft Preliminary Design Optimization Framework to Consider Fantail System,” 2nd International Conference on Computational Design in Engineering, November 14-16, 2012.
          59. Lee, I., Na, Y.-H., and Shin, S.-J., “Aeroelastic Analysis Of A Turbine Blade Using Transform Techniques And A Non-Uniform Beam Model,” The 13th International Symposium on Unsteady Aerodynamics, Aeroacoustics and Aeroelasticity of Turbomachines, Tokyo, Japan, September 11-14, 2012.
          60. Kwak, J. Y., Hong, W., Shin, S.-J., Yi, J. S. and Kim, C., “Transient Time Aeroelastic Analysis for a Supersonic Flight Vehicle with a Ramjet Engine,” 42nd AIAA Fluid Dynamics Conference and Exhibit, New Orleans, Louisiana, June 25-28, 2012.
          61. Kwak, J. Y., Chun, T. Y., Il Lee, Shin, S.-J., and Bauchau, O. A., “Development of an improved Finite Element Domain Decomposition method using local Lagrange multipliers,” 6th Korea-Japan Workshop on Computational Mechanics, May 30-31, 2012.
          62. Balakumaran, N., Eun, W.-J., Lee, J.-H., and Shin, S.-J., “Structural Design of an Active Trailing-Edge Flap Blade for Helicopter Vibration Control”, 53rd AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference-Adaptive Structures Forum, Honolulu, Hawaii, USA, April 23-26, 2012. .
          63. El Arras, A., Jung, C.-H, Na, Y.-H., and Shin, S.-J., “Various Structural Approaches to Analyze an Aircraft with High Aspect Ratio Wings,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference-Adaptive Structures Forum,
          Honolulu, Hawaii, USA, April 23-26, 2012.
          64. Na, Y.-H. and Shin, S.-J., “Equivalent Plate Analysis of a Composite Wing with a Control Surface ,” 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference-Adaptive Structures Forum, Honolulu, Hawaii, USA, April 23-26, 2012.
          65. Balakumaran, N., Eun, W.-J. and Shin, S.-J., “Structural Design and Flap Actuation Mechanism Validation of an Active Trailing-edge Flap Blade,” The 1st Asian/Australian Rotorcraft Forum, Busan, February 13-15, 2012.
          66. Cho, H. S., Shin, S.-J., Lee, J.B., Yee, K. J., Kim, D. K. and Cho, I. J., “Development of a Full-Scale BO105 Helicopter Trim Analysis,” The 1st Asian/Australian Rotorcraft Forum, Busan, February 13-15, 2012.
          67. Ryu, H. Y., Shin, S.-J., Lee, J.B., Yee, K. J., Kwak, J. S. and Kim, D. K., “Aerodynamics - Structural Combined Analysis for an Accurate Helicopter Forward Flight Prediction,” The 1st Asian/Australian Rotorcraft Forum, Busan, February 13-15, 2012.
          68. Kwak, J. Y., Chun, T. Y., Shin, S.-J., and Bauchau, O. A., “Development of an improved Finite Element Domain Decomposition Method,” The 4th Aerospace Innovation Workshop, Tokyo, February 1-2, 2012.
          69. Shin, S.-J., Balakumaran, N., Eun, W.J., “Structural and Kinematic Design of an Active Helicopter Rotor Blade with a Trailing-edge Flap,” The 4th Aerospace Innovation Workshop, Tokyo, February 1-2, 2012.
          70. Shin, S.-J., “Design and Development of an Active Helicopter Rotor Blade for Vibration Control,” Keynote Speech, Second International Conference on Aerospace Science and Engineering (ICASE), Islamabad, Pakistan, December 28-30, 2011.
          71. Balakumaran, N., Lee, J.-H., and Shin, S.-J., “Structural Analysis and Safety Design of Composite Wind Turbine Blades considering Static Loads,” International Symposium on Green Manufacturing and Applications, Seoul, Korea (Republic of), October 6-7, 2011.
          72. Na, Y. H. and Shin, S.-J., “Study on the Effectiveness and Accuracy of an Equivalent Plate Modeling,” The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, September 18-22, 2011.
          73. Kwak, J. Y., Chun, T. Y., Shin, S.-J., and Bauchau, O. A., “Computational Approaches for Large Scale Structural Dynamic Analysis using Advanced Domain Decomposition Technique,” The 2011 World Congress on Advances in Structural Engineering and Mechanics, Seoul, September 18-22, 2011.
          74. Chun, T.-Y., Shin, S.-J., Kee, Y.-J., “Structural Analysis of a Bearingless Rotor System using an Improved Flexible Multi-body Model,” 37th European Rotorcraft Forum, Milano, September 13-15, 2011.
          75. Lim, J., Kim, T., Shin, S., and Kim, D., “Structural Integrity Design of a Composite Wing in a Tiltrotor Aircraft,” 18th International Conference on Composite Materials, August 22-25, 2011.
          76. Laxman, V., Chung. C.-H., Yoon, N.-K., and Shin, S.-J., “Aeroelastic Analysis of a Medium-Altitude Long-Endurance Aircraft with High-Aspect Ratio Wings,” International Forum on Aeroelasticity and Structrual Dynamics, Paris, June 26-30, 2011.
          77. Chung, C.-H., Shin, S.-J., Kim, T., “Robust Aeroelastic Analysis and Validation of a Stored Wing,” International Forum on Aeroelasticity and Structrual Dynamics, Paris, June 26-30, 2011.
          78. Lim, J., and Shin, S.-J., “Improvement of a Rotorcraft Preliminary Design Optimization Framework,” 52th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, April 4-7, 2011.
          79. Kwak, J. Y., Chun, T. Y., Shin, S.-J., and Bauchau, O. A., “Computational Approaches for Large Scale Structural Analysis using Domain Decomposition Technique,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Denver, Colorado, April 4-7, 2011.
          80. Lee, J. H., Shin, S.-J., “Structural Integrity Design for an Active Helicopter Rotor Blade with Piezoelectric Flap Actuators,” SPIE Smart Structure/NDE, San Diego, CA, March 9, 2011.
          81. Lee, I., and Shin, S.-J., “Forced Vibration of a Turbine Cascade under Low and High Engine Order Exitation Predicted by Transformation Techniques,” 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, Orlando, Florida, January 4-7, 2011.
          82. Kwak, J.-S., Shin, S.-J., Lee, J.-B., Yee, K.-J., and Kim, D.-K., “Development of Rotorcraft Trim Analysis Including Fuselage Component Flexibility,” Heli Japan 2010, Omiya, Japan, November 1-3, 2010.
          83. Lim, J., Shin, S.J., Lee, C., and Jung, S., “Improvement of a Rotorcraft Preliminary Design Optimization Framework,” Heli Japan 2010, Omiya, Japan, November 1-3, 2010.
          84. Kim, T., Lim, J., Lee, J., and Shin, S.-J., “Structrual Design and Optimization of a Tilt-rotor Aircraft to Enhance Whirl Flutter Stability,” International Powered Lift Conference, Philadelphia, PA, October 5-7, 2010.
          85. Lee, J. H., Kwak, J. S., Son, K. T. and Shin, S.-J., “Development of an SNU Intelligent Rotor Blade with an Active Trailing-edge Flap,” AHS International 66th Annual Forum and Technology Display, Phoenix, Arizona, May 11-13, 2010.
          86. Chung, C. H. and Shin, S.-J., “Worst Case Flutter Analysis of a Stored Wing with Structural and Aerodynamic Variation,” 51st AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Orlando, Florida, Apr 12-15, 2010.
          87. Kwak, J. Y., Hong, W., Shin, S.-J., Lee, Il, Yim, J. W. and Kim, C., “Static Aeroelastic Analysis of a Supersonic Flight Vehicle with a Ramjet Engine,” 51st AIAA/ ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference,
          Orlando, Florida, Apr 12-15, 2010.
          88. Kwak, J. S., Yoon, S. H., Shin, S.-J., and Kim, C., “Loosely Coupled CFD/CSD Analysis for a Helicopter Rotor in Hover and Forward Flight,” AHS Specialists’ Conference on Aeromechanics, San Francisco, 20-22 January, 2010.
          89. Lee, J. H., Kim, J. M., Shin, S.-J., “Development of an Advanced Rotorcraft Preliminary Design Framework,” AHS International Forum on Rotorcraft Multidisciplinary Technology, Renaissance Seoul Hotel, Seoul Korea, October 19-20, 2009.
          90. Park, S. C., Shin, S.-J., Kim, D. K., “Helicopter Rotor Load Prediction Using a Geometrically Exact Beam with Multi-component Model,” AHS International Forum on Rotorcraft Multidisciplinary Technology, Renaissance Seoul Hotel, Seoul Korea, October 19-20, 2009.
          91. Lee, J. H., Kim, T. S., and Shin, S.-J., “Design of an Intelligent Rotor Blade with a Trailing Edge Flap Manipulated by Piezoelectric Actuators,” ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, Oxnard, CA, September 21-23, 2009.
          92. Lee, H. K., Kwak, J. S., Shin, S.-J., Yang, C. M., and Aoyama, T., “Aerodynamic/ Structure/Acoustic Prediction of HART II Rotor Using Weakly Coupled CFD-CSD Analysis,” American Helicopter Society 65th Annual Forum, Grapevine, TX, May 27-29, 2009.
          93. Chung, C. H. and Shin, S.-J., “A Robust Aeroelastic Analysis of a Stored Wing with Structural and Aerodynamic Variation,” International Forum on Aeroelasticity and Structural Dynamics 2009, Seattle, WA, June 22-24, 2009.
          94. Lim, J. H. and Shin, S.-J., “Modularization and Formula Upgrade for a Rotorcraft Preliminary Design Framework,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, May 4-7, 2009.
          95. Lee, I., Kim, T., and Shin, S.-J., “Aeroelastic Analysis of a Turbine Cascade with Various Inter-Blade Phase Angles,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, May 4-7, 2009.
          96. Lee, H. K., Yoon, S. H., Kwak, J. S., Shin, S.-J., and Kim, C., “Coupled Analysis Between CFD and CSD for a Helicopter Rotor in Hover and Forward Flight,” 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, May 4-7, 2009.
          97. Kim, T. S., Shin, S.-J., and Kim, D. H., “Stability Prediction in Tiltrotor Aircraft Including Rotor-wing Aerodynamic Interaction,” 34th European Rotorcraft Forum, Liverpool, UK, September, 2008.
          98. Lee, H. K., Shin, S.-J., Yoon, S. H., and Kim, C., “Coupled CFD/CSD Analysis of a Hovering Rotor Using High Fidelity Unsteady Aerodynamics and a Geometrically Exact Rotor Blade Analysis,” 34th European Rotorcraft Forum, Liverpool, UK, September, 2008.
          99. Viswamurthy, S. R., Park, S. C., and Shin, S.-J., “Helicopter Rotor Load Prediction Using a Geometrically Exact Beam Theory with Multibody,” 34th European Rotorcraft Forum, Liverpool, UK, September, 2008.
          100. Kim, T. S. and Shin, S.-J., “Influence of Aerodynamic Interaction Between Rotor and Wing Upon Whirl Flutter Stability in a Tiltrotor Aircraft,” International Powered Lift Conference 2008, London, UK, July 22-24, 2008.
          101. Chung, C. H., Shin, S.-J., and Kim, T., “A New Robust Aeroelastic Analysis Including Aerodynamic Uncertainty from Varying Mach Numbers,” 49th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials, Schaumburg, IL, 7-10 April, 2008.
          102. Lee, H. K., Viswamurthy, S. R., and Shin, S.-J., “Coupling of a Geometrically Exact Rotor Blade Analysis with Unsteady Aerodynamics and Dynamic Inflow,” AHS Specialists’ Conference on Aeromechanics, San Francisco, CA, January 23-25, 2008.
          103. Lee, I., Shin, S.-J., and Kim, Y. R., “Influence of Mistuning and Disk Flexibility in the Turbomachinery Stability and Forced Response,” International Gas Turbine Congress 2007 Tokyo, Tokyo, Japan, December 2-7, 2007.
          104. Park, J. S., Kim, T. S., and Shin, S.-J., “Design and Aeroelastic Analysis of Advanced Active Flap Blades Utilizing Single Crystal Piezoelectric Actuators,” International Forum on Rotorcraft Multidisciplinary Technology, Seoul, Korea, October 15-17, 2007.
          105. Kim, T. S., Park, J. S., and Shin, S.-J., “Optimization of the Rotor and Wing Structural Design to Improve Tiltrotor Whirl Flutter Stability,” International Forum on Rotorcraft Multidisciplinary Technology, Seoul, Korea, October 15-17, 2007.
          106. Park, J. S., Kim, T. S., and Shin, S.-J., “Vibratory Loads Reduction Analysis of Advanced Active Flap Blades Utilizing Single Crystal Piezoelectric Actuators,” 18th International Conference of Adaptive Structures, Ottawa, Canada, October 3-5, 2007.
          107. Kim, T. S. and Shin, S.-J., “Whirl Flutter Stability Analysis of a Tiltrotor Aircraft Including Various Aerodynamic Models,” 33rd European Rotorcraft Forum, Kazan, Russia, September 11-13, 2007.
          108. Kim. T. S. and Shin, S.-J., “The Role of Unsteady Aerodynamic Interaction between Rotor and Wing In Tiltrotor Aircraft Whirl Flutter Instability,” International Forums on Aeroelasticity and Structural Dynamics 2007, Stockholm, Sweden, June 18-20, 2007.
          109. Park, J. S., and Shin, S.-J., “Optimal Design for Advanced Integrally Twisted Helicopter Rotor Blades,” 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, Korea, pp.45, May 21-25, 2007.
          110. Park, J. S., and Shin, S.-J., “Preliminary Design Optimization on Active Twist Rotor Blades Incorporating Single Crystal Macro Fiber Composites,” American Helicopter Society 63rd Annual Forum, Virginia Beach, VA, May 1-3, 2007.
          111. Kim, K. H., Lee, H. K., Shin, S.-J., Kim, D. H., and Kim, S. H., “Toward a Practical Analysis for Fluid-Structure Interactions in Helicopter Rotors,” 48th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
          112. Lee, I., Chung, C. H., Shin, S.-J., and Kim, Y. R., “Flutter and Forced Response Analysis of an Intentionally Mistuned Bladed Disk,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
          113. Chung, C. H. and Shin, S.-J., “Verification of and Aircraft Flutter Analysis with Uncertainty,” 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, an Materials Conference, Honolulu, Hawaii, April 23-26, 2007.
          114. Park, J. S. and Shin, S.-J., “A Preliminary Design on Second Generation Integral TwistActuated Blade,” International Conference on Computational and Experimental Engineering and Sciences-2007, Miami, FL, USA, January 2007.
          115. Kim, K. H. and Shin, S.-J., “Development of an Intermediate-Level Analytical Framework For Fluid-Structure Interaction in Helicopters,” Heli Japan 2006, Nagoya, Japan, November 2006.
          116. Kim, T. S. and Shin, S.-J., “An Assessment Tool on Active/Passive Control Methodologies for Whirl Flutter Stability in Tiltrotor Aircrafts,” Heli Japan 2006, Nagoya, Japan, November 2006.
          117. Kim, K. H, Shin, S.-J., Lee, J., Yee, K., and Oh, S., “Toward a More Complete Analysis for Fluid-Structure Interaction in Helicopters,” KSAS-JSASS Joint International Symposium, Pusan, Korea, November 2006.
          118. Shin, S.-J., “Active Control of Helicopter Vibration,” 3rd International Conference -The Advancement of Aerospace-Oriented Technology in the 21st Century, Goyang, Korea, November 2006.
          119. Kim, K. H. and Shin, S.-J., “Development of an Intermediate-Level Analytical Framework For Fluid-Structure Interaction in Helicopters,” 32nd European Rotorcraft Forum, Masstricht, Netherlands, September 2006.
          120. Kim, T. S. and Shin, S.-J., “An Assesment Tool on Active/Passive Control Methodologies for Whirl Flutter Stability in Tiltrotor Aircrafts,” 32nd European Rotorcraft Forum, Masstricht, Netherlands, September 2006.
          121. Kim, T. S., Shin, S.-J., and Kim, T., “Time and Frequency Domain Analysis of Whirl Flutter Stability in Tiltrotor Aircraft,” 47th AIAA Structures, Structural Dynamics and Material Conference, Newport, RI, USA, April 2006.
          122. Cho, S. H., Song, S., Shin, S.-J., and Kim, T., “Aeroelastic Analysis of an Isolated Airfoil Under a Pulsating Flow,” 47th AIAA Structures, Structural Dynamics and Material Conference, Newport, RI, USA, April 2006.
          123. Shin, S.-J., “Active Aeroelasticity in Rotary Wing Aircrafts,” International Conference for Mechanical and Automotive Technologies 2005, Jeonju, Korea, June 2005.
          124. Yoon, T. H., Paik, S. H., Shin, S.-J., and Kim, S. J., “Computational Material Characterization of Active Fiber Composite,” Proceedings of 15th International Conference on Adaptive Structures and Technologies, Bar Habor, Maine, October 25-27, 2004.
          125. Cesnik, C. E. S., Mok, J., Parikh, A., and Shin, S.-J., “Optimum Design Framework for Integrally Twisted Helicopter Blades,” 45th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, April 19-22, 2004, AIAA Paper No. 2004-1761.
          126. Paik, S. H., Kim, J. Y., Shin, S.-J. and Kim, S. J., “Numerical Simulation of Actuation Behavior of Active Fiber Composites in Helicopter Rotor Blade Application,” Proceeding of the 11th SPIE Annual International Symposium on Smart Structures and Materials,
          San Diego, California, March 15-18, 2004. “Closed-loop Vibration Control Experiment of Active Twist Rotor,” Proceedings of the 14th International Conference on Adaptive Structures and Technologies, Seoul, Korea, October 7-9, 2003.
          127. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., “NASA/Army/MIT Active Twist Rotor Closed-loop Control Test for Vibration Reduction,” Proceedings of the 29th European Rotorcraft Forum, Friedrichshafen, Germany, July, 2003.
          128. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., ”Closed-loop Control Test of the NASA/ Army/MIT Active Twist Rotor for Vibration Reduction,” Proceedings of the American Helicopter Society 59th Annual Forum, Phoenix, Arizona, May 6-8, 2003.
          129. Shin, S.-J. and Cesnik, C. E. S., “Helicopter Performance and Vibration Enhancement by Twist-Actuated Blades,” 44th AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference -Dynamic Specialist Conference, Norfolk, Virginia, April 7-10, 2003, AIAA Paper No. 2003-1818.
          130. Shin, S.-J., Cesnik, C. E. S., and Hall, S. R., “Control of Integrals Twist-Actuated Helicopter Blades for Vibrations Reduction,” Proceedings of the American Helicopter Society 58th Annual Forum, Montreal, Canada, June 11-13, 2002.
          131. Shin, S.-J. and Cesnik, C. E. S., “Helicopter Vibration Reduction in Forward Flight Response Using Blade Integral Twist Control,” and Materials Conference -Adaptive Structures Forum, Denver, Colorado, April 22-25, 2002, AIAA Paper No. 2002-1447.
          132. Wilbur, M. L., Mirick, P. H., Yeager, Jr., W. T., Langston, C. W., Cesnik, C. E. S., and Shin, S.-J., “Vibratory Loads Reduction Testing of the NASA/Army/MIT Active Twist Rotor,” Proceedings of the American Helicopter Society 57th Annual Forum, Washington, DC, May 9-11, 2001.
          133. Shin, S.-J. and Cesnik, C. E. S., “Forward Flight Response of the Active Twist Rotor for Helicopter Vibration Reduction,” 42nd AIAA/ASME/ ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference -Adaptive Structures Forum, Seattle, Washington, April 16-19, 2001, AIAA Paper No. 2001-1357.
          134. Shin, S.-J. and Cesnik, C. E. S., “Aeroelastic Analysis of Active Twist Helicopter Rotor Blades,” JSASS 14th International Sessions (in conjunction with the 38th Aircraft Symposium), Sendai, Japan, October 11-13, 2000.
          135. Cesnik, C. E. S., Shin, S.-J., Wilbur, M. L., and Wilkie, W. K., “Design, and Testing of the NASA/Army/MIT Active Twist Rotor Prototype Blade,” Proceedings of the 26th European Rotorcraft Forum (in conjunction with the 15th European Helicopter Association Symposium), Hague, Netherlands, September 26-29, 2000.
          136. Wilbur, M. L., Yeager, Jr., W. T., Wilkie, W. K., Cesnik, C. E. S., and Shin, S.-J., “Hover Testing of the NASA/Army/MIT Active Twist Rotor Prototype Blade,” Proceedings of the American Helicopter Society 56th Annual Forum, Virginia Beach, Virginia, May 2-4, 2000.
          137. Shin, S.-J., Cesnik, C. E. S., and Wilbur, M. L., “Dynamic Response of Active Twist Rotor Blades,” 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference -Adaptive Structures Forum, Atlanta, Georgia, April 4-6, 2000, AIAA Paper No. 2000-1711.
          138. Wilkie, W. K., Wilbur, M. L., Mirick, P. H., Cesnik, C. E. S., and Shin, S.-J., “Aeroelastic Analysis of the NASA/Army/MIT Active Twist Rotor,” Proceedings of the American Helicopter Society 55th Annual Forum, Montreal, Canada, May 25-27, 1999.
          139. Cesnik, C. E. S., Shin, S.-J., Wilkie, W. K., Wilbur, M. L., and Mirick, P. H., “Modeling, Design, and Testing of the NASA/Army/MIT Active Twist Rotor Prototype Blade,” Proceedings of the American Helicopter Society 55th Annual Forum, Montreal, Canada, May 25-27, 1999.
          140. Cesnik, C. E. S. and Shin, S.-J., “On the Cross Sectional Modeling of Active Helicopter Blades,” Proceedings of PACAM VI, Rio de Janeiro, Brazil, January 4-8, 1999.
          141. Cesnik, C. E. S. and Shin, S.-J., “On the Twist Performance of a Multiple-Cell Active Helicopter Blade,” Proceedings of the 9th International Conference on Adaptive Structures and Technologies, Cambridge, Massachusetts , October 14-16, 1998.
          142. Cesnik, C. E. S. and Shin, S.-J., “Structural Analysis for Designing Rotor Blades with Integral Actuators,” 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Long Beach, California, April 20-23, 1998, AIAA-98-2107.